Be Developers:
Put your banner here!


Be Newsletter

Volume II, Issue 38; September 23, 1998

Table of Contents


Be Developer Classified are an opportunity for Be developers to tell each other about projects they're working on, are thinking about working on, or would like to work on. Here's your chance to request assistance on a project, or make your talents known to other projects.

For more information, check out the Classified Ads section in the Registered Be Developer area.

Our Austin Be User Group is looking for a new president to take over its leadership.

If you are interested, please contact sylvie@be.com

BE ENGINEERING INSIGHTS: While You're Waiting For R4...
By Steve Sakoman sakoman@be.com

As I write this we have just passed the feature freeze milestone for BeOS R4. Now the period of intense testing and bug fixing begins, culminating in that joyful last minute drive to the local CD duplicators (conveniently located just down the street from Baron and Dominic's favorite watering hole and entertainment emporium).

One of the first things we do during this test period is to begin using the new release for all our daily work. Therefore, I'm writing this article on my freshly built copy of R4. I'll resist the temptation to regale you with a list of all the wonderful new features in R4. Instead, I'll devote the rest of this article to describing some fun you can have with the BeOS and video capture while you wait for us to finish R4.

You can find a copy of the source code I'll be talking about (and the application binaries themselves) at


First a warning. The low-level video API used in these demo apps shouldn't be the basis for any commercial applications. It will be deprecated with the next release. R4 will ship with a brand new media kit; using its API will ensure your future happiness and prosperity. Of course, we'll provide similar sample code for the new API!

You'll also need a video capture card. We support any of the Bt848/Bt878/Bt879-based video capture cards from a number of different manufacturers: Hauppauge, Intel, Miro, Diamond, Avermedia, US Robotics (expect to spend $79-$129).

You'll find three applications in the distribution: a TV/video viewer with full-screen capability, a still and motion video capture program, and a simple "webcam." There's too much code to discuss in detail here, so I'll keep the discussion at a fairly high level. The basic structure of all three applications is similar, and consists of four basic building blocks.

The SourceWIndow class

SourceWIndow is a subclass of BDirectWindow. Its constructor looks like this:

SourceWindow( BRect frame,
              char *name,
              char *device,
              BVideoImage **captureRingBuffer = NULL,
              int32 ringBufferCount = 1,
              void **vbiBuffer = NULL);

Here's where the real work gets done. When constructed with none of its optional parameters, this class creates a BDirectWindow and displays the captured video directly to the screen. The class handles window movement, resizing (from 640x480 to 80x60), and colorspace/workspace changes with no action required on the part of the parent. All controls for the class are implemented with BMessages and are constructed in a way that allows you to directly set the SourceWindow as the target for your UI widget messages: i.e., sliders for brightness and contrast; popup menus for video sources and formats; text boxes for channel selection.

The optional parameters allow access to some of the more advanced features of SourceWIndow. If you specify a capture ring buffer, the video input is split into two streams. The F1 (odd) fields of the video stream continue to be displayed in the BDirectWIndow, but the window size is now limited to 320x240. The F2 (even) fields are captured in the specified ring buffer. The image size and color space for the two streams are independent. For example, the displayed image can be a resizable RGB32 image, and the captured image can be fixed at 352x240 YUV411. This feature is used in both the video capture app and the webcam app. See the source code for details.

The final optional parameter gives access to the portion of the video signal dedicated to digital information services (closed captions, teletext, Intercast). SourceWindow provides the raw samples of data captured during the vertical blanking interval (VBI) of the video signal. Decoding is left as an exercise for the programmer, though the TV viewing app does demonstrate the capture of US closed captions.

The ControlWindow Class

This class implements the UI for each of the applications using BTabView and standard BeOS UI widgets. The hardware setup and video controls tab views are the same for all three apps. Additional tab views are added as appropriate for each application; i.e., still and motion capture tabs for the grabber application, and configuration info for the webcam app.

The Settings Class

Many thanks to Pavel Cisler for contributing this code. This class handles saving and restoring user settings for the application controls and preferences. The settings are stored as plain text in /boot/config/settings/bt848/settingsN (again where N is 0 to 3, depending on the number of capture cards you have in your system). All three applications share the same settings files.

The Application Specific Code

The application-specific code is located in the same source file as the application constructor. In the case of the TV app, the only application-specific code is the closed caption decoder. This is implemented as a separate thread that collects and decodes the closed caption information contained in each video frame (at the blazingly fast rate of 4 characters per frame, or 120 characters/sec). The closed caption information is sent to a terminal window; it won't be seen unless the application is run from a terminal command line. One could also redirect the output to a file if interested in capturing the text of the evening news or a favorite TV show.

The video capture application (grabber) implements the still frame capture feature in its MessageReceived function, in response to a button push from the ControlWindow. This code uses the Translation Kit to save the captured image. The motion capture feature is implemented as a separate thread. We routinely capture uncompressed 352x240, 16-bit per pixel images at 30 fps (along with the 44.1khz stereo audio) to an inexpensive UltraDMA hard drive (about 5 Mbytes/sec sustained data rate). The app currently saves in a simple raw format. This code provides a simple example of how to get high throughput from the Be file system.

The webcam app is similar to the grabber app. The main difference is in the code used to post the captured image to your web site. I used two excellent network libraries authored by Be's own Howard Berkey. You can pick up copies on BeWare at


These libraries reduce the effort required to post a captured image to the web to only eight lines of code:

/* ftp the local file to our web site */
    FtpClient 	ftp;
    if (ftp.connect(fServer, fLogin, fPassword))  // connect to server
      if (ftp.cd(fDirectory))   // cd to desired directory
        if (ftp.putFile(fFileName, "temp"))   // send file to server
          if (ftp.moveFile("temp",fFileName)) // change to desired name
    Alert("Ftp Connection failed!");

We've set up a webcam using this app here at Be. You can sneak a peak at what's going on in our lunch area (and other locations) by pointing your browser to:


You may wonder why the app is called CodyCam. It's named for my 13-year-old son Cody, who worked here this summer as an unpaid QA intern. He was the "project lead" in putting together the first webcam implementation: a shell script that used the grabber application to capture the image and the command line ftp program to send it to his web site. We've upgraded his implementation to use the CodyCam app. It runs 24 hours a day -- don't be suprised to see some of us sleeping on those $10 couches between now and the R4 release!

Who Is Your Customer?
By By Dave Johnson mailto:davej@be.com

When I talk to software companies I often ask, "Who is your customer?" All too often I hear the answer, "Everybody," and I realize they haven't thought this through. How much does it cost to market your product to "everybody?" What advertising message do you craft that applies to "everybody"?

So -- here's an exercise in defining your customer narrowly, and what that can lead to. First, I'll talk about how it helps lower your marketing costs, then about how a clear customer definition affects development issues and support.

A Thought Experiment

Let's start with a narrowly defined customer. Red plastic. Who do you sell red plastic to? Everybody. Suppose that instead of making red plastic products you make taillight covers for the 1994 Fort Taurus. Your customer is owners of 1994 Ford Tauruses (with broken taillight covers). Suppose that you want to let them know about your product.

There's a highway near Be which at many times of the day seems to have most of the cars in California on it. What a great place to put a billboard for your taillight covers! "Everybody" will see the ad! The billboard company offers the really low price of one penny per car that passes that billboard. Your ad will only cost you -- let's see, one penny times most of the cars in the world equals -- around $100,000 a day.

Now suppose there's a turnoff to a highway that only 1994 model cars drive on. The billboard company wants 5 cents per car here, but since there are fewer cars the cost is only $50,000 a day. This is better because the cars you aren't reaching aren't your buyers anyway.

At another turnoff for Fords only billboards cost 25 cents per car, and at turnoff from there for Tauruses only the billboard charge is 75 cents per car. You reach far fewer cars and pay maybe $1 per car, which seems high compared to a penny for "everybody." To further complicate your decision, there's a billboard just past Bob's Driving Range for Really Bad Golfers where most of the golf balls are hit onto the highway, where they break the -- you guessed it -- taillight covers! That billboard costs $2.50 per car! Since every car is a potential buyer for your taillight covers and none of the cars you've eliminated will ever be a potential buyer, this is a much better place to advertise than on the billboard that reached "everybody." You're now reaching all your customers for around $2,500 instead of $100,000.

What Was the Point of That Overly Long Story?

This story illustrates how a narrow definition of your product makes decisions about where to advertise and how much to spend easier. Instead of selling taillight covers to everybody, we narrowed the customer down to buyers of 1994 Ford Taurus taillight covers. When you think about how you can narrow your own customer definition you'll discover that a number of problems with development, marketing, and sales begin to answer themselves.

Engineers Often Do It Backwards

Maybe I'm approaching this backwards -- asking you to define your customer after you already have a product. But in the software business I've often seen technically oriented people come up with what they think is a great product and only then look at the business realities. (I'm not a marketing person making fun of engineers; I have my own BeMasters award. I did it this way myself for too long. It was an expensive lesson.) The reality is that to make money you have to serve the needs of a particular bunch of customers -- to fill a demand in a market. What business types do is determine a market that needs to be served, analyze of the market's financial structure, and then come up with a product that meets those needs while grabbing enough revenue from those customers to make a profit. But I see a lot of developers who already have the product and are starting to figure out how to sell it.

[Now a BeOS plug -- the BeOS is an excellent platform upon which to build new products. See my article "How to Make a Million Dollars Developing for the BeOS (No Kidding) http://www.be.com/aboutbe/benewsletter/Issue99.html#Developer.]

Generic Word Processor

So you have a product -- a generic word processor -- and you need to find customers. Your brother-in-law, who works in medical insurance and needs lots of medical transcriptions done, is always complaining about his generic word processor -- it doesn't format the transcriptions correctly, and has many other shortcomings. He'd pay three times what that generic word processor costs because it would still save him money.

An idea forms. I have a generic word processor that I'm having trouble selling even for a low price. I'm aware of a "market" for a specialized word processor buyers would pay a lot for...

Falling Into Place

Narrowly defining your customer can clarify many marketing and development questions. For example, with a generic word processor you have the problem of reaching everyone who writes anything. But if your product is a medical transcription word processor you start with a clearer idea of who you need to reach and how to reach them. Development issues come together, like defining a feature set. Sales channels start to become apparent.

Reaching the Customer

With the medical transcription word processor as your product, does it seem easier to figure out how to reach medical transcribers than "everybody?" You can go to insurance companies and sales offices, malpractice attorneys, hospitals, etc. What you need to do is easier to understand as you narrow your definition of who the customer is.

Development Issues

If your customers are medical transcribers, what features do you want to add? How about a medical spelling dictionary? Specialized formatting for insurance company medical transcription documents? What kind of documentation does the specific customer need?

Also, methodology for determining your product's feature set defines itself. Unlike a product targeted at "everybody," it's easier to decide on a good feature set for a product targeted to medical transcribers; you observe them at work and ask what they think would improve their productivity.

Expanding Your Efforts

Now that you've defined your customer narrowly, you may find that you want to expand from the niche you've captured. This differs from your original position of trying to market a generic word processor to "everybody." For one thing, you might have found a steady revenue base to finance the cost of developing the product further. You also have the ability (and experience) to start marketing the expanded product to new areas.

By Owen Smith, DTS Engineerorpheus@be.com

"Developers' Workshop" is a weekly feature that provides answers to our developers' questions, or topic requests. To submit a question, visit


Many beginning developers we speak with wonder what porting their application from Windows to BeOS entails. This article makes a start towards answering that question. My goal is to illustrate some of the differences between the popular Microsoft Foundation Class (MFC) library for Windows and the BeOS API.

Since a developer workshop without sample code is like a kindergarten classroom without Play Doh, I submit the following for you toddlers to investigate:


Doodle is essentially a rewrite of the infamous "Scribble" MFC tutorial for the BeOS. It's a simple drawing application which supports common application features such as file I/O, printing, toolbars, a most recently used (MRU) file list, and multiple document views. It implements most of the functionality of its Windows cousin.

Those of you who are familiar with the MFC library may want to compare this code directly with the Scribble source code, available on the Visual C++ CD-ROM. I've sprinkled comments across Doodle's code to note specific comparisons between the BeOS API and the MFC library; you can browse these by searching the source tree for the text "MFC NOTE." Even if you're not a rabid Windows aficionado, however, you may still find some things in the sample code useful, such as the document architecture and toolbars.

Comparing the BeOS API to Windows: a First Look

The BeOS API presents a level of abstraction somewhere between the Win32 C-based API and the MFC library. Superficially, the BeOS API bears a greater resemblance to the MFC library: it's primarily object oriented, and many BeOS API classes are similar to their Microsoft counterparts (BRect = CRect, BWindow = CWnd, BView = CView, etc.). However, the MFC library provides many things beyond Windows operating system basics that the BeOS API doesn't -- such as standard command implementations, a document management system, and dialog data exchange/validation. In this sense, the BeOS API more closely resembles the Win32 API. (On the other hand, the BeOS API does do a lot of stuff that the MFC library doesn't; I'll cover some of these features below.)

I've written Doodle from scratch, without using third party libraries, resource editors, or even Microsoft code. This way, you can see exactly what the raw BeOS API gives you. Because the BeOS API is at a lower level of abstraction, I've provided some of the functionality that's standard with the MFC library. The amount of code you'll see in Doodle is considerably more than the equivalent in the Scribble tutorial.

For the rest of the article I'll document specific design and behavioral differences between the MFC library and the BeOS API that I encountered while writing Doodle, from general issues to coding specifics.


One of the most critical differences between Windows and Be programming is the threading model. In MFC, you can (and many applications often do) get away with using only one thread: the main application thread, which implements the main message loop that dispatches messages to all the application's windows. While this simplifies development, it's unsatisfactory for many applications, including media-based ones, because each of your windows, views, and documents is competing for that one thread's time. For example, a window in the background doing calculations could prevent a window in the foreground from processing messages or responding to user input. Multithreading allows these tasks to be scheduled separately, so windows can operate smoothly and independently.

You can do multithreading in MFC, but you have to implement the different threads yourself. Also, the maps the MFC library uses to translate between Windows handles and MFC library objects are thread-local, making it impossible to pass MFC library classes that use Windows resources between threads. Instead, a thread has to pass the lower-level handle to the other thread, which wraps a new MFC library object around it on the other side.

The BeOS takes a different approach. Since each window you create runs in its own thread, just about every Be application automatically takes advantage of multiple threads. Unlike the MFC library, however, BeOS objects have no problems being shared between threads, and many objects even help you control access to them through built-in locking mechanisms.

In Doodle, this threading model adds some complexity to the system. One of the big questions is what to do about the documents, which can be associated with multiple window threads, and may want to do calculations separately from each other and the other threads. To allow each document to function as independently as possible, I decided to derive the document class from BLooper, to make documents event- driven objects that each run in their own thread, similar to an MFC user interface thread.

Such a multithreaded situation requires careful planning (or debugging...) of communication between the document, window/view, and application threads. I've chosen to have the document communicate with the app and windows via asynchronous messages, whereas the windows and application communicate with the document through locked, direct access. Since the document won't need to lock the windows or application, deadlocks are avoided.

Multiple Document Interface and Frame Windows

There is no MDI analog in BeOS as there is in the MFC library, where the main application window is a frame that encloses the document, or "child," windows. Thus, porting MDI applications requires extra thought.

In writing Doodle and doing away with Scribble's frame window, I divided the frame window responsibility among several objects. The application became the natural receptacle for Window/Cascade and Window/Tile commands; menus and menu handling moved into the child windows; and toolbars were transformed into autonomous windows.


Simply put, the built-in messaging mechanism in BeOS is much more powerful than what the MFC library provides. Rather than being limited to moldy WPARAM and LPARAM arguments, a message in BeOS is a powerful object that packages any kind of data in a simple, structured format. BMessage also supports scripting, two-way, and inter- application communication. Given the extra capabilities of messages, it's a good idea to rethink communication strategies in your application; many types of communication can be rewritten using messaging in a much more succinct and elegant way.

Take, for example, the MRU file list in Doodle. I set up each MRU item in the File menu with a message that is dispatched to the application whenever the item is invoked. The message contains an entry_ref that locates the file to open. These messages end up being processed in exactly the same way that Tracker and File/Open entry references are processed, so no extra coding is needed.

Modal Windows

As you would expect in a heavily multithreaded system, BeOS objects work particularly well in asynchronous situations. The messaging system is a big part of the reason. Instead of trying to access the data directly from the modeless window, it's trivial to parcel the data into a BMessage and dispatch that to the target instead. This helps eliminate unwanted dependencies between the dialog and the recipient.

By comparison, modal dialogs are actually more complicated to code in BeOS's multithreaded environment because not only does the user interface have to limit your actions to the modal window, but the calling thread has to block and wait for the modal dialog to finish. The BeOS handles the modal UI behavior for you, but you have to implement the thread synchronization yourself. For these reasons, and because modeless dialogs are often more natural for the user, I generally prefer to use modeless dialogs. Dialogs such as the File/Open dialog are implemented as modeless.

Still, there are some things that you're best off waiting for. In File/Close, for instance, you want to make sure not to delete the window or its associated document before the user has a chance to save the document's data. This means that the File/Save dialog needs to behave modally. In case you do need to implement modal dialogs, Doodle's Pen Widths dialog serves as an example.

Graphics Architecture

Although, unlike many BeOS applications, Doodle's drawing tasks are very simple, it's enough to demonstrate that the BeOS graphics architecture is more streamlined and versatile than its MFC library counterpart. For example:

1. Views know how to draw themselves, and don't rely on an ephemeral device context for rendering. (However, in order to draw they must be attached to a window or bitmap.)

2. The BeOS coordinate system is floating point-based, supporting subpixel precision and hassle-free scaling.

3. The BeOS's concept of mapping modes is a bit different from the MFC library. By default, the BeOS works in a typographical mapping mode where 1 unit translates to 1 pixel on the screen, or 1 point (= 20 twips = 1/72 inch) on the printed page. It differs slightly from the MFC direct mapping modes because the y axis points down. For printing in Doodle, I perform an isotropic scaling on the BView to emulate Scribble's mapping mode of MM_LOENGLISH (1 unit = .01 in.) on the printed page.


The only thing I use resources for in Doodle is to store simple application data such as signature, icons, and acceptable MIME types. These are easy to add to a resource file through the FileTypes preference panel. However, you'll notice that the stuff you would normally put into a Windows resource, like dialog layouts, menus, accelerators, and toolbars, has been coded by hand in Doodle. The BeOS's resource format is certainly capable of handling these kinds of data, but there's no standard way of editing or using those resources in an application.

The Registry

Say good-bye to RegEdit -- love it or hate it, in BeOS, you won't be needing it. You can access the MIME-based BeOS application roster through the FileTypes preference panel, or query it programmatically through BRoster and BMimeType. There's also a directory in the system set aside for storing application-wide settings(/boot/home/config/settings). Doodle uses this area to store the entries in the MRU file list.


Analogous to the MFC library's capabilities for serialization and structured storage, BeOS offers two classes for managing persistent data: BFlattenable (if you like serializing from streams), or BArchivable (which uses a BMessage to store the data). Because Doodle doesn't need any particular control over how the data is written in the file, and the items being stored are standard types which BMessage supports, I used BArchivable in the implementation.


I've covered a lot of significant differences between the Be Way of doing things, and that Other Way. If you look further, however, you'll realize that I've only scratched the surface of comparisons between BeOS and Windows development. I've left some important areas for future columnists: graphics, audio/video/image manipulation, the file system, the add-on/linked library architecture, embedded objects, memory management... the list goes on. Though MFC and the BeOS API may look similar, the BeOS API is definitely a different animal.

Wintel Restructured?
By Jean-Louis Gassée

In the past few weeks, there's been an unusual amount of media speculation regarding a change in the Wintel alliance. Not surprisingly, we've been asked what we think of all this and how it affects our future in the x-86 world.

The interest in the matter is understandable -- a tremendous amount of energy is stored in the bond between Microsoft and Intel. Intel people, by the way, resent the term "Wintel." They refer to it as a typo, and they don't like having their company name mangled. With a name like Be, we have some sympathy for their position.

As to the energy stored in the bond, consider the following scenario. On the right, a Pentium processor. On the left, a processor of identical computing capabilities, power consumption, and cost, but which doesn't run Windows software. Which processor will sell for more?

A tremendous amount of profits, shareholder value, and billions of dollars are "stored" in the bond between Windows and Intel x-86 processors. I use the x-86 expression with intent and, in explaining my intent, I should refine my use of "Windows." I should write "Windows 9x," because this is the only strain of Windows that is so firmly bonded to the x-86 processors. Windows NT runs on other processors (MIPS and Alpha). As for the PowerPC, Windows NT ran on it, although I don't know if the latest release still does or if future versions will.

When the hardware independence of Windows NT was first announced, there was much speculation about a diminished role for Intel processors and, as a consequence, about a better future for competing architectures. Instead, the Pentium took the lion's share of NT systems. With the benefit of hindsight, we can appreciate the weight of binary compatibility with the huge portfolio of Windows "classic" applications. Windows NT might have been hardware independent, but the legacy of Windows applications wasn't.

For the sake of completeness, various solutions exist to run x-86 application binaries on Windows NT systems (or Unix, for that matter) based on other processors, but slower performance and other complications prevented such arrangements from becoming mainstream. The result is that Windows NT appears firmly bonded to Intel processors, for the time being. It's not yet clear what will happen with NT 5.0, especially if a "consumer version" of NT becomes the successor to Windows 98.

Windows CE presents a different situation. If anything, it isn't seen at all on x-86 processors. There might be technical and business reasons for this: power consumption and price. Perhaps, but the fact remains, and many have seen it as yet another potential fracture in the Intel-Microsoft alliance.

On the other hand, Intel appears intent on using the ARM processors for consumer-oriented embedded applications, a segment from which it has been absent. This could involve Windows CE, or Wind River Systems, a company Intel is allied with. Wind River makes the highly respected VxWorks: one of its many claims to fame is providing the software platform for the Mars Pathfinder vehicle.

But the most visible agent of change appears to be Linux. Recently, Oracle committed itself to this increasingly popular version of Unix. Not to be left behind, IBM has announced the availability of DB2 products on Linux. This is, of course, yet another phase of the Unix vs. NT struggle for enterprise applications.

Whether or not Intel saw it coming, reacted to this, or had reasons of their own, I won't speculate. What remains is that Intel, through a number of executive pronouncements, has declared itself in favor of Linux. Hence the speculation about a fracture in the historic bond between Microsoft and Intel. Allegedly, one very senior executive stated something to the effect Microsoft software ran on other processors and Intel ought to support several operating systems.

This leads us to the unavoidable question: How does all this affect us? I wish I could predict in detail where this is going but, in general, I view it as a positive development -- with some caveats. One qualification is the role Linux plays in the marketplace. As mentioned above, this concerns the Windows NT vs. Unix battle for enterprise applications. Over time, through the good work of the Linux community, Linux has become a credible Unix alternative, not just to NT, but to the "captive" versions of Unix offered by players such as Sun, HP, and others.

An "unshackled" version of Unix is attractive to Oracle in its struggle against Microsoft. In Oracle's mind, if Windows NT becomes the sole enterprise applications platform, over time, Microsoft will leverage ownership of the OS into dominating the enterprise segments Oracle today derives its profits from. IBM probably follows a similar line of reasoning.

We are not in the battle to become an alternative to Windows NT in enterprise applications. Our goal is to coexist with, rather than replace the general-purpose Windows 98, to complement it in media-rich applications where its office-productivity roots prevent it from making the best use of the underlying hardware.

Another caveat lies in the phrase "credible Unix alternative." We're not attempting a better implementation of an existing OS, and we have more to do and to prove in order to achieve the same level of credibility that Linux now enjoys. The upcoming Release 4 of the BeOS will be an opportunity to make serious progress in that direction.

In a world where the dominant belief is that we are confined to a one-OS space, it's difficult to make our more ecumenical case. As you can imagine, we welcome the shift in common wisdom the success of Linux has brought. An interesting question remains: What will happen to the energy stored in the (ambi)valence bond?

Recent Be Newsletters | 1998 Be Newsletters
1997 Be Newsletters | 1995 & 1996 Be Newsletters

Copyright ©1998 Be, Inc. Be is a registered trademark, and BeOS, BeBox, BeWare, GeekPort, the Be logo and the BeOS logo are trademarks of Be, Inc. All other trademarks mentioned are the property of their respective owners. Comments about this site? Please write us at webmaster@be.com.